Rice Lake’s 920 i Controller Helps to Increase Tread Life
A TIRE COMES INTO THIS WORLD FOR JUST ONE PURPOSE. IT CARRIES US FROM POINT “A” TO POINT “B” AND BACK AGAIN THOUSANDS OF TIMES, OCCASIONALLY LEAVING A MARK OR TWO ON THE PAVEMENT OF OUR LIVES. And suddenly it’s over, sometimes with a bang, and other times just slowly and gradually, never to be heard from again. But after that tire’s life ends, then what? The world only needs so many tire swings, garden sculptures, and DIY craft projects. Where does all that tread go? Many of these rubber souls enjoy an afterlife well beyond their 50,000 mile warranty, thanks in large part to products like Rice Lake’s 920 i, and the resourcefulness of companies like Ecore International, in Lancaster, Pennsylvania.
Ecore is one of only a handful of players in the recycled-rubber game, but the first to bring recycled-rubber flooring out of the fitness center and apply it toward more common, everyday surfaces. Director of Operations, John McFalls, makes the case for rubber’s versatility. “It has a lot of qualities: safety, sound absorption, resilience, and it lasts a very long time.” From artificial turf and playground surfaces, flooring tiles, carpeting underlayment, basketball and tennis courts, to pavers, industrial gaskets and more, there’s almost no limit to what a tire can become. Ecore products like these can be found around the globe, and have even made their way out of this world, aboard NASA’s space shuttle.
More than 150 years ago, long before the automobile was even a glimmer on the horizon, Ecore got its start in cork. “This is the oldest process we have,” John says, gesturing to a stack of cork-filled burlap sacks. “These bales come right from the cork farm. What we do is we send them up into a machine that breaks it into fine particles, we take the moisture out and we’re left with granules.” In granular form, this cork can be mixed with a blend of adhesives and fused together for a wide range of purposes, much the same way rubber can.
To see where Ecore’s rubber products get their start, you’d have to make tracks to the company’s processing plant in York, Pennsylvania. That’s where dirty, worn out tires turn into something with a lot more potential. John continues, “Basically we chop them up, process the material into finer and finer particles, we screen it, clean it, get the stones out, get the fibers out, and it’s all shipped here, to Lancaster.” These rubber granules, or “rubber crumb,” when mixed with things like pigments and polymers and bonded together with heat, will take on almost any size and shape.
It takes a lot of special recipes to get everything pulled back together just right, and that processing and measuring of ingredients takes a lot of scales. At Ecore you’ll find them everywhere. To keep things running smoothly, Ecore partners with Lancasterbased Garber Metrology to handle all of its calibration, from the hand tools to the scales in the manufacturing process. And when it came time to source equipment that would help automate their tile-making process, Garber recommended their scale brand of choice: Rice Lake.
According to John, the company uses the same equipment and processes to make a wide range of floor tiles, requiring a lot of flexibility and the quick changeover from one product to the next. It’s physically demanding work with the potential for back injuries throughout. “This is the only department we have that’s really a manual labor process, where you’re actually physically touching the raw material, so we wanted to do everything we could to try and reduce that.”
To make the tiles, the crumb is mixed in small batches and portioned very precisely for each mold in a heated press. Using their recipes and different molds, Ecore can make tiles of varying size, thickness, texture, and layers. And by adding cutouts made separately on a waterjet cutter, they can even create pictures within each tile, for playgrounds and other custom needs.
John references a pile of tiles stacked on a pallet, black on one side and light brown on the other. “A product like this would be for some type of commercial flooring application. It might go into a health and fitness club, maybe into an office or entry way or something like that. You can purchase it in tiles like this, or much thinner tiles, or in a roll for a large room where you’d just roll the material out.”
Ecore’s tile-making process has always been physical by nature. Operators manually pull 40 pounds of rubber crumb from a bin into a bucket resting on a small floor scale. Surrounded by the heat of the presses, they repeatedly hoist each bucket up to chest level and pour the material into either side of a two-sided mixer. A Rice Lake IQ plus 810 tallies the contents of the mixer for each of the additional ingredients, but that does little to ease the repeated physical demands of the job. Once mixed, the contents are poured from the mixers into bins on the floor, which then need to be lifted onto another scale and portioned into single tile batches. From there, the bins are carried to the press where the operator fills each mold. With all this lifting, movement, and potential for back injury, something had to be done.
With the help of Garber Metrology, Ecore has been able to upgrade and automate the process for the majority of its tile-making stations. They retrofitted existing mixers with better load cells and automated the flow of ingredients using the graphic display and wall-mount controls of Rice Lake’s 920 i Controller. Rubber crumb and other ingredients are now dispensed automatically according to a stored recipe. But it gets even better.
Ecore also added spring lifts to keep each operator’s movement at waist level. “The pallet lift, as he loads it, keeps dropping, and when it’s empty it springs up to waist level again.” Another lift, also utilizing the 920 i controller, was installed in front of the mixers, raising the bins back up from the floor so they can slide them onto an adjacent bench scale for portioning. “We really didn’t do it for efficiency. It was all ergonomics and safety, to stop operators from having to bend over and lift things up.” John adds, “You’ve got the heat down here, the hot presses…anything we could do to make it a little easier. They love it.”
Making things easier is a theme that hits at the very core of everything that Ecore is about. It’s in their vision: “Help to improve the quality of people’s lives today and tomorrow, through innovative solutions for our customers.” As far as they’re concerned, keep on driving. Leave a skid mark or two. Why not? It could be that the world around us is getting just a little softer, a little more durable and a little better—one bald tire at a time.
Manufacturer: Rice Lake
Industry: ManufacturingLinked To: