btek logo sized

B-TEK Concrete Deck Truck Scales Specifications

Posted on May 3, 2016

Standard Sizes: between 10′ x 10′ to 80′ x 11′

Full Electronic Analog

  • Certificate of Conformance: 97-116A1
  • Scale Capacity: Up to 270,000 lbs.
  • Concentrated Load Capacity: 80,000 lbs.
  • Scale Height: 36”
  • Available Widths: 8’ – 16’
  • Weighbridge Deck: 6” concrete deck – deck coping supplied for field installation
    • Option: Factory supplied deck sheeting and rebar
  • Steel Preparation: Commercial blast cleaning SSPC-SP6
  • Paint System: Cross-Linked two-part Epoxy – 2 to 4 mil primer base coat Two-part UV resistant Polyurethane – 2 to 4 mil top coat
  • Load Cell: 75K CPR-M analog compression-column load cell, 700 Ohm, 2 mV/V Stainless steel environmentally sealed (IP67) construction
  • Load Cell Cable: Stainless steel sheathed cable with clear polymer coating, integral
  • Junction Box: NEMA 4X FRP enclosure(s) and B-TEK 4-cell summing board with GDT surge protection
  • Surge Protection: CPR-M analog load cells utilize ground straps and base plate isolation disc Surge protection enhanced by Tripp-Lite Isobar Ultra 4-Outlet line transient protection device
  • Indicator: Not included with analog cell version

Standard Sizes: between 10′ x 10′ to 80′ x 11′

Full Electronic Digital

  • Certificate of Conformance: 97-116A1
  • Scale Capacity: Up to 270,000 lbs.
  • Concentrated Load Capacity: 80,000 lbs.
  • Scale Height: 36”
  • Available Widths: 8’ – 16’
  • Weighbridge Deck: 6” concrete deck – deck coping supplied for field installation
    • Option: Factory supplied deck sheeting and rebar
  • Steel Preparation: Commercial blast cleaning SSPC-SP6
  • Paint System: Cross-Linked two-part Epoxy – 2 to 4 mil primer base coat Two-part UV resistant Polyurethane – 2 to 4 mil top coat
  • Load Cell: 75K CPD-M digital compression column load cell, RS-485 digital output Stainless steel hermetically sealed (IP68) construction
  • Load Cell Cable: Stainless steel sheathed cable with clear polymer coating and water-tight connectors
  • Junction Box: NEMA 4X stainless steel enclosure(s) and 8-cell terminal board with GDT surge protection
  • Surge Protection: CPD-M digital load cells along with Dialogik indicator protect against lightning Built-in surge protection enhanced by Tripp-Lite Isobar Ultra 4-Outlet AC line transient protection device and two in-line serial port surge protection devices
  • Indicator: Supplied with a Dialogik D410 desk-top digital indicator (required)

Categories:
Specifications

Manufacturer:   B-Tek Scales

Linked To:
Get A
Quote
JPBowlin
Contact UsJPBowlin
 
|9245|