btek logo sized

B-TEK Steel Deck Truck Scale Specifications

Posted on May 3, 2016

Full Electronic Analog

  • Certificate of Conformance: 97-116A1
  • Scale Capacity: Up to 270,000 lbs.
  • Concentrated Load Capacity: 80,000 lbs.
  • Scale Height: 30”
  • Available Widths: 8’ – 16’
  • Weighbridge Deck: 3/8” tread plate decking
    • Option: Factory supplied deck sheeting and rebar
  • Steel Preparation: Commercial blast cleaning SSPC-SP6
  • Paint System: Cross-Linked two-part Epoxy – 2 to 4 mil primer base coat Two-part UV resistant Polyurethane – 2 to 4 mil top coat
  • Load Cell: 75K CPR-M analog compression-column load cell, 700 Ohm, 2 mV/V Stainless steel environmentally sealed (IP67) construction
  • Load Cell Cable: Stainless steel sheathed cable with clear polymer coating, integral
  • Junction Box: NEMA 4X FRP enclosure(s) and B-TEK 4-cell summing board with GDT surge protection
  • Surge Protection: CPR-M analog load cells utilize ground straps and base plate isolation disc Surge protection enhanced by Tripp-Lite Isobar Ultra 4-Outlet line transient protection device
  • Indicator: Not included with analog cell version

Standard Sizes: between 10′ x 10′ to 80′ x 11′

Full Electronic Digital

  • Certificate of Conformance: 97-116A1
  • Scale Capacity: Up to 270,000 lbs.
  • Concentrated Load Capacity: 80,000 lbs.
  • Scale Height: 30”
  • Available Widths: 8’ – 16’
  • Weighbridge Deck: 3/8” tread plate decking
    • Option: Factory supplied deck sheeting and rebar
  • Steel Preparation: Commercial blast cleaning SSPC-SP6
  • Paint System: Cross-Linked two-part Epoxy – 2 to 4 mil primer base coat Two-part UV resistant Polyurethane – 2 to 4 mil top coat
  • Load Cell: 75K CPD-M digital compression column load cell, RS-485 digital output Stainless steel hermetically sealed (IP68) construction
  • Load Cell Cable: Stainless steel sheathed cable with clear polymer coating and water-tight connectors
  • Junction Box: NEMA 4X stainless steel enclosure(s) and 8-cell terminal board with GDT surge protection
  • Surge Protection: CPD-M digital load cells along with Dialogik indicator protect against lightning Built-in surge protection enhanced by Tripp-Lite Isobar Ultra 4-Outlet AC line transient protection device and two in-line serial port surge protection devices
  • Indicator: Supplied with a Dialogik D410 desk-top digital indicator (required)

Categories:
Specifications

Manufacturer:   B-Tek Scales

Linked To:
Get A
Quote
JPBowlin
Contact UsJPBowlin
 
|9256|

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close